| Customization: | Available |
|---|---|
| Material: | Casting Iron |
| Usage: | for Air Conditioner, for Manufacture, for Refrigerate, Aquaculture, Sewage Treatment, Industry |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Roots blower is a positive displacement blower with impeller end face and front and rear end cover of the blower. The principle is a rotary compressor that uses two blade-shaped rotors to move relative to each other in the cylinder to compress and deliver gas. This kind of blower is simple in structure and convenient to manufacture. It is widely used in aquaculture aeration, sewage treatment and aeration, cement conveying, and is more suitable for gas conveying and pressurizing systems in low pressure occasions, and can also be used as a vacuum pump.
Vietnam cement 1.5kw pump Tri-Lobe roots blower for Vacuum packaging
| Model | Pressure | Flow Rate | Motor |
| RHSR50 | 9.8kpa-58.8kpa | 0.67m3/min-2.48m3/min | 0.55kw-4kw |
| 63. 7kpa-98kpa | 0. 45m3/m in-2. 02m3/min | 2.2kw-7.5kw | |
| RHSR65 | 9.8kpa-58.8kpa | 0.95m3/min-3.64m3/min | 0.55kw-5.5kw |
| 63.7kpa-98kpa | 0. 78m3/m in-2.96m3/min | 3kw-11kw | |
| RHSR80 | 9.8kpa-58.8kpa | 2.36m3/min-6.13m3/min | 1.5kw-11kw |
| 63.7kpa-98kpa | 1.82m3/min-5.24m3/min | 5.5kw-15kw | |
| RHSR100 | 9.8kpa-58.8kpa | 3.28m3/min-9.62m3/min | 1.5kw-15kw |
| 63.7kpa-98kpa | 2.65m3/min-8.67m3/min | 7 .5kw-18.5kw | |
| RHSR125 | 9.8kpa-58.8kpa | 5.37m3/min-13.39m3/min | 2.2kw-22kw |
| 63. 7kpa-98kpa | 4.64m3/min-12.25m3/min | 11kw-30kw | |
| RHSR150 | 9.8kpa-58.8kpa | 10 .39m3/min-29. 61 m3/min | 5.5kw-55kw |
| 63.7kpa-98kpa | 9.53m3/min-28.35m3/min | 8.5kw-75kw | |
| RHSR175 | 9.8kpa-58.8kpa | 19.65m3/min-40.67m3/min | 11kw-75kw |
| RHSR200 | 9.8kpa-58.8kpa | 27.65m3/min-58.81 m3/min | 15kw-90kw |
| 63. 7kpa-98kpa | 25 .34m3/m in-56. 92m3/min | 551<w-1321<w | |
| RHSR250 | 9.8kpa-58.8kpa | 61.4m3/min-97.1 m3/min | 18.5kw-132kw |
| 63.7kpa-98kpa | 58.1 m3/min-93.7m3/min | 90kw-220kw | |
| RHSR300 | 9.8kpa-58 8kpa | 87 .1 m3/min-136. 7m3/min | 22kw-185kw |
| 63.7kpa-98kpa | 83.8m3/min-134.4m3/min | 132kw-280kw | |
| RHSR350 | 9.8kpa-58 8kpa | 111.9m3/min-198.1 m3/min | 30kw-250kw |
| 63. 7kpa-98kpa | 102.2m3/min-179.65m3/min | 185kw-400kw |
Wooden case and iron case packaged
Send by ship / plane / train
Roots Blower Application
1.Aquaculture
2.Sewage treatment/ Effluent Treatment & Sludge Management
3.Conventional anaerobic & aerobic systems
4.Chemical industry
5.Mining
6.Solid Waste Management Bio gas plants
7.Engineered landfills
8.Printing and paper feeding
9.Electrical transportation
10.Pneumatic conveying
11.Pneumatic transport
12.Air Pollution Control, Noise Abatement & Ventilation Wet scrubbers
13.Vacuum packaging
14.Part demoldingChina Sewage Treatment Industrial Air Roots Blower for Vacuum Aquaculture Aeration
Roots Blower Features
1.The helical construction uses the stator helical method that the screen lines of casing at the suction and discharge sides are cut to a helical shape,and the triangle suction and discharge port formed by a straight line of the rotor top is to be opened and closed gradually.
2.The rotors are three lobes.
3.By adoption of an unique profile of rotor, the clearance between the rotors can be held to be constant, which makes the efficiency even higher.
4.The precision of rotors is fully controlled and variation of precision between blowers is almost nil because the rotors are produced under the mass production control by utilizing a prenision NC maching.
5.The advanced driving gears are adopted but only to extend the use life but also to make noise lower.
6.The transported air is clean and is any oil-dust free oil lubrication is not needed in casing and the structure design prerent the bearing oil and gear oil from entering the casing.
How Does a Roots Blower Work?
Roots blowers are typically oil-free, air-cooled technologies comprised of two rotors that spin in opposite directions. Once the compression chamber comes into contact with the outlet port, compressed air flows back into the housing from the pressure side. Further compression takes place as the volume of the compression chamber further decreases with continued rotation. This means that the compression occurs against full counter-pressure, which results in low efficiency and a high noise level.
The low-efficiency of these blowers limits them to applications requiring very low pressure and single-stage compression. These are also frequently used as vacuum pumps and for pneumatic conveyance.
3 lobe air blowers fish pond roots blower for mining/biogas/aquaculture/sewage treatment/landfill/cement
Tai'an City RuiHeng Building Materials Co., Ltd is specialized in the research, development, production and sales of geosynthetic materials, plastic products and plastic machinery. Our company is devoted to geosynthetic material research and development and application.
Our main products are hdpe geomembrane liner, plastic geogrid, geotextile, 3D geomat, geocell, geomembrane welding machine, extrusion welder and welding rod, etc. Our products have been widely used by clients in more than 20 countries and regions. Our products are applied in aquaculture, railways, highways, water conservancy, electric power, metallurgy, ports and municipal engineering construction. We have won the praises of customers.
1.Do you have an extended warranty?
Yes, every product is 1 year quality warranty under customer correct using the products.12 months warranty and long-term marketing, after-sales support.
2.If you have a designated forwarder ?
Please contact us and provide destination port details. We have own forwarder. Working term is very fexible in our company.
){kind=link}