Geo2 Hot Wedge Welder Weldy for Geomembrane Bonding
Geomembrane welding machine Introduction:
Geomembrane welding machine is one of many welding equipments. The main welding objects are: HDPE, PE-C, PP, LDPE. Grooved geomembrane, anti-seepage film; mechatronic design, small size, light weight, field scene The homework is very operative. Double weld lap welding, high temperature control precision, high welding strength, good sealing effect, weld seam leaking weld bead in the middle, automatic crawling can realize slope, vertical and inverted automatic welding.
Geo2 Hot Wedge Welder Weldy Descriptions:
The Weldy Geo 2 mini wedge welder is designed for welding geomembranes. This quick and lightweight welding machine is ideal for geomembranes from 0.5 to 1.5 mm thick (HDPE 0.4-1.0 mm; TPO 0.7-1.5 mm). The miniwelder geo2 can be used to weld fish farm and water tanks, in foundation sealing and many other industrial areas. The miniwelder geo2 distinguishes itself through its revolutionary drive technology and its intuitive use. Temperature and speed easily can be activated and deactivated by means of two buttons, and adjusted using two dials. The current process status is displayed by two LEDs.
Application
Geo2 Hot Wedge Welder Weldy Welding Machine for Geomembrane Bonding
Fish and shrimp pond liner
Power plant wastewater treatment
Geo2 Hot Wedge Welder Weldy Features
Durable capacitor: Designer for welder, Endure high temperature, Long-lasting lifetime.
PC circuit board: High quality electronic component.
High quality radiator: Bigger size, Efficient heat radiate.
SMT control board: Self producing, efficient and durable.
| Attribute |
Unit |
Value |
| Frequency |
Hz |
50/60 |
| Weld seam width |
mm |
20 |
| Voltage |
V~ |
120/230 |
| MAX. Power |
W |
800 |
| Hot wedge material |
|
Copper/Chrome steel |
| Weld seam width |
mm |
2 x12 |
| Temperature |
°C |
60 -480 |
| Speed |
m/min |
0.4 - 7.5 |
| Size (L × B × H) |
mm |
228 x 228 × 170 |
| Weight |
kg |
3.9 |
| Conformity marking |
|
CE |
Weldable materials |
|
LD-PE,PVC*(0.5-0.8mm)
TPO/FPO (0.7-0.8mm)
HD-PE (0.4-0.8mm)
*PVC Only with steel wedges |
Geo2 Hot Wedge Welder Weldy Operating regulations
1.)Use with grounded 3-cord mains cable and 3-hole socker with capacity not less than 10A (socket
corresponds with welder plug,phase L connected to live wire ,N to zero line ,phase to grounded
protection liner),confirm that external lines have been well connected .Check that power is on off
state and regulate temperature control potentiometer and speed control potentiometer to 0
position ,press lever handle down to disengage pressure roller ,then insert the plug .
2). Turn on the power and select certain temperature and speed, take several narrow materials for
try welding. Temperature selection may be different for the same material at different ambient tem
perature and material thickness. To determine the best welding effect, adjust the speed to approxi
mately 2m/min, and then fine increase it from low to high temperature (approximately 250ºC-350ºC
).
3). Flatly and straightly trim the weld edges and frontage faced, with lower left and upper right over
lapped. The overlap width is 100mm.
4). After temperature and speed have been determined, insert material to be welded between the t
wo pressure rollers, make machine body parallel with edges of base materials and engage press l
ever handle for proper motion. Generally, only observation of deviation between welding mark and
base materials is needed for operator, and timely make correction on small degree.
5). When welding will be ended, timely press lever handle to disengage upper and lower pressure
roller to prevent rubber wheel damage for long duration.
6). Excessive temperature high and low may occur because of thermal inertia. On this condition, te
mperature deviation may be compensated by speed regulation on a small degree.
Geo2 Hot Wedge Welder Weldy Packing
Geo2 Hot Wedge Welder Weldy FAQ
1. who are we?
We are based in Shandong, China, start from 2006,sell to Domestic Market(70.00%),Southeast Asia(15.00%),Oceania(4.00%),Africa(3.00%),Central America(3.00%),South America(2.00%),North America(00.00%),Mid East(00.00%),South Asia(00.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Geogrid,Geomembrane,Geotextile
4. why should you buy from us not from other suppliers?
More than ten years of production experience
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Western Union;
Language Spoken:English,Chinese
){kind=link}
){kind=link}